홈페이지> 제품 리스트> 고속 문> 알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어
알루미늄 나선형 고속 도어

알루미늄 나선형 고속 도어

$2000-4000 /Set/Sets

지불 유형:L/C,T/T,Paypal,Western Union
인 코텀:FOB,CFR,CIF,EXW,FCA,DDU,Express Delivery
최소 주문량:1 Set/Sets
수송:Ocean,Land,Air,Express
포트:Shanghai,Ningbo,Taicang
Color:
제품 속성

모형RRD-Alu

상표켄보 문

보증 서비스일년

개방 방식롤링 풀, 자동적 인

판매 후 서비스온라인 기술 지원, 무료 예비 부품, 반품 및 교체

주재료PVC, 강철

엔지니어링 솔루션 기능그래픽 디자인, 3D 모델 디자인, 프로젝트를위한 토탈 솔루션

응용 시나리오슈퍼마켓, 창고, 작업장, 보관 및 옷장, 외부, 기입, 별장, 쇼핑 센터, 차고 및 창고

디자인 스타일산업, 절충주의, 현대, 유럽 ​​사람

원산지중국

사용 장소산업

표면 처리끝마친

종류산업 문, 롤러 셔터 도어, 차고 문

도어 재질알루미늄 합금, 플라스틱, 강철

Operation DeviceControl button, Remote control, Motion sensor, Vehicle detector, Pull switch

Running SpeedMax 2.5m/s

SizeCustomized size

Power Supply1-phase 220V, or 3-phase 380V, 50/60HZ

Power0.75KW, 1.5KW, 2.2KW

Door Panel43mm thick insulated sandwich panel

포장 및 배송
판매 단위 : Set/Sets
포장 종류 : 수출 목적의 목재 상자 패키지
사진 예 :
다운로드 :
알루미늄 나선형 고속 문
제품 설명

알루미늄 나선형 고속 롤링 도어는 모든 빠른 롤러 도어의 가장 높은 엔드 모델입니다. 강력하고 열 절연 알루미늄 샌드위치 패널로 만들어졌으며 일반 PVC 고속 도어와 동일한 고속도로로 만들어집니다. 도어 레일은 패널이 위아래로 부드럽게 움직일 수 있도록 특별히 나선형 모양으로 만들어집니다. 이러한 나선형 빠른 도어는 빠른 달리기 속도, 열 단열재, 우수한 바람 저항 및 도난 강도를 포함한 완전한 이점이 있습니다. 높은 수준의 공장, 창고, 차고 및 상업용 건물에 가장 적합한 선택입니다. 외부 또는 내부 위치를 모두 설치할 수 있습니다.


고속 도어는 현대 공장과 창고에서 널리 사용되는 매우 빠르게 열리고 닫도록 설계된 자동 롤업 도어 유형입니다. 빠른 속도와 주파수로 작동 할 수 있으며 트래픽이 많은 지역에 매우 적합합니다. 재료 처리의 효율성을 향상시킵니다. 반면에, 문을 통한 공기 흐름과 열 전도는 분명히 감소하여 공간 내부의 깨끗하고 위생 및 온도를 유지합니다. 자동 실행은 프로그래밍 된 제어 시스템 및 센서로 실현됩니다.





                 


               

 High speed running

 

The opening speed can reaches up to 2.0m/s. And the closing speed can reaches up to 1.0m/s. This means that the door can finish a cycle of opening and closing within in 

several seconds. It bring several major benefits:

 

 

Improve work efficiency:  

Workers or forklifts will no need wait in front of the door and can directly go across it. The material handling speed is higher by at least 5 times than tradional roll up doors;

   

Keep clean and hygiene: 

The fast running reduces the open time to only seconds in a cycle of passing the door. Thus much less outside air and dust will enter the room;

 

Keep temperature: 

Heat loss is reduced by large by reducing open time.

               


High frequency working

 

The motor is frequency motor, and control panel is frequency inverter system. It can change work power output gently. So the door can start and stop in a soft process. Its running speed will accelerate or decelerate gradually. This can avoid overriding and over-heating caused by constant up and down. So the door can keep running and no need worry its motor burnt or structure damaged. 

 

Our door can run up to 2000 times per day. This is why it is a best choice for busy area with heavy traffic like forklifts or passing workers. Our door can run up to 2000 times per day. This is why it is a best choice for busy area with heavy traffic like forklifts or passing workers. 

         

                 

 

Thermal insulated and high strength

The door slat is made from double skin aluminum sheet filled with high density PU foam. Total thickness reaches 43mm. 

 

Good thermal insulation:  

Special cold-bridge design, cutting off the heat transmission route. It can help keep temperature inside the room;

 

High wind-resistance: 

benefiting from its aluminum material and reinforcing curving design, the door can windstand wind up to 120km/h; 

 

Safety protection: 

it can prevent outside people and protect the warehouse from theft and robbery.


               

 

 

 

Smooth running 

 

Our guide rail is a Archimedes spiral. It is the line of points corresponding to the locations over time of a point moving away from a fixed point with a constant speed along a line that rotates with constant angular velocity. 

 

With such a spiral guide rail, our doors can move very smooth in a constant speed. This reduces the friction and obstruction during coiling and improves the work life. 

 

 

Longer work life with lower maintenance   

 

Advanced Italy servo technology drive motor and control system. Compared  with traditional door system in the market, it has several advantages:

 

Double encoders:  

They calibrate with each other, to make running limit more accurate than tradtional limit sensors. This completely avoid running limits error and reduce maintenance. And even if one encoder is damaged, you can switch to another encoder and the door will continue to work well, no need repair;

 

Absolute encoder: 

outside encoder is advanced absolute encoder. It will always keep the set limits even during power failure. So you no need bother to do the frequent job of re-seting the limits;

 

Flexile Torque Control System:  

The output torque of motor keeps changing according to running speed and load automaticlaly. This avoid over-heating and over-load after long time use, and make sure the door

work longer life.        

           


               

 

 

 

User freindly Human-machine interface system

 

There is a LED display on the controller, showing all parameters and setting steps in English language. You can set or change any parameters like using a mobile phone. So you will feel very easy and comfortable to use the doors even you do not have any experience. 

 

And it is inbuilt with Fault-shooting program. The display will show the error information when there is some problem. 

 

There are addtional input and output signals in the controller. You can activate it by the screeen and the door will work together with your production line, robots, conveyor, or other machines.


 

         

                 

 

 

 

Various Colors 

 

We supply six different colors for your choice. You can make a free selection among them. Our doors can integrate into your whole building design and make the building harmony and beautiful. 

 

Grey, ② Red,  Orange, ④ Champagne, 

 Yellow,  White, ⑦ Blue, ⑧ Silver,  Coffee

 

Transparent windows can be made at human eye height. Its material is polycarbonate window with ultroviolet sunlight-resist. This makes it easy to see what is happening at

another side of the door. It will be more safe for a busy area with moving workers and forklifts or other vehicles. 

 

 

       


               

Multiple safety protection

 

Considering the high speed running of the door, safety protection become very important to avoid possible accidents.  This can not be neglected when using such high performance doors. There are three safety protection devices:

 

Safety photo sensor:  

The sensor can send a infrared light beam from one side to another. When it is blocked by passing human or vehicles, the door will immediately stop or get up. Thus it aims to avoid accident;

 

 

Safety airbag sensor: 

It is a soft rubber airbag at the bottom. If something touches the bottom, the door will stop or get up. So it aims to stop accident once it happens;

 

Alarm lamp: 

It gives out light flash signal or sound signal when the door running. Passing workers or vehicles can easily get aware that the door is working and take special care to avoid accidents.

 

                 

 

 

Various shape to fit your project site 

 

In some cases, you may find it difficult to install a standard spiral door in your area. The ceiling is not high enough, or there are some objects like water pipe or cable tubes passing by.  There is not enough head rom to place the top body. To solve this problem, we expand the design of guide rails, and offer three options. 

 

Standard spiral: 

Archimedes spiral, first choice, for enough top space;

 

 

Oval spiral:  

for limited space but above 500mm space

 

Low-lintel rail: 

for very limited top space less than 500mm;

 

Manual opening device for emergency use 

Each door will have a manual opening device fixed on its side frame. If there is power failure, pull up the manual device, and the door will open itself for some height, for emergency opening.



다양한 작동 방법

벽 장착 제어 버튼 (표준)

원격 제어 레이더 센서 Vechicle 루프 검출기 풀 코드 스위치 :


기술 데이터:

Applicable location:             both interior and exterior            
Max dimension:              8000mm wide*7000mm high                  
Max opening Speed:              2.0m/s               
Max closing speed:               1.0m/s              
Wind resistance:              Beaufort scale 10 (25m/s)             
Power supply:              1-phase 220±10%V,50/60HZ, or  1-phase 380±10%V,50/60HZ            
Protection level of electric:              IP55             
Available colors of fabric:             Silver, Yellow, Blue, Red, Grey, White, Clear             
Door panel: 43mm thick sandwich panel filled with polyurethane of density 48kg/m³
Frame material:              Powder coated galvanized steel, optional for 304 stainless steel             
Lifting way:             Standard spiral (950mm+ space); Oval spiral (650mm+ space) ; Oval 


홈페이지> 제품 리스트> 고속 문> 알루미늄 나선형 고속 도어
질문 보내기
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신